L.J. Star offers a full line of sight glass accessories, such as wipers, sprayers, light timers, heaters and replacement glass.

Biogas Sight Glass with Light, Wiper and Camera Options
  • Mounting for sightglass: weld-on, bolt-on or compression fitting (for concrete).
  • Lighting: explosion proof to ATEX or UL Listed.
  • Video Camera: explosion proof, resolution: 480 lines, 0.4 megapixels.
  • Wiper: Manual or motorized explosion proof
  • Spray Device to assist with glass cleaning
Heating Jackets Accessories

An accessory for standard (view through) sight flow indicators. Steam prevents cool spots in the process line while allowing observation.

Sight Glass Wiper, Type I

Manual sight glass wiper for Lumiglas® sight glasses and sight windows. It may be used in combination with a with a spray ring or spray nozzle. Sight glass must be ordered with bore hole.

  • Temperature: up to 220 degrees F.
  • Pressure: up to 90 psi.
  • All stainless construction with Teflon or Silicone wiper blade
  • Sizes: 80 to 225 mm OD (other sizes available)
Wiper for Sight Glass, Type II, DN Sizes 100 to 200 DIN28120

Manual Wiper for Sight Glass suited for DIN 28120 style sight glass. Requires threaded bore through sight glass assembly and weld pad.

  • Temperature: up to 428 degrees F.
  • Pressure: 235 psi.
  • All stainless construction with Teflon or Silicone wiper blade
  • Sizes: DN Sizes 100 to 200 DIN28120 sight glasses.
Motorized Wiper for Sight Glass

Motor for motorized wiper. It may be used in combination with a with a spray ring or spray nozzle.

  • Explosion Proof to EEx d IIC T5 (Zones 1 & 2 and 21 & 22).
  • Non-Explosion Proof version available.
  • Temperature: ambient between -20 and +50 degrees C.
  • Mounting: Fitted onto Lumiglas® Wipers Type I or Type II.
  • Operating voltage: 12VDC (24V and 120V non-ex power supplies available).
Spray Ring to Clean ANSI Bolt-On Sight Glass

Spray ring fits ANSI flange connections for an intermittent or continuous pressure-cleaning on the inside of the sight glass surface.

  • Compatible spray media: fluid, gas, air supplied to 1/4 inch NPT inlet.
  • Spray nozzles: 8 or 16, depending on size
  • Material: carbon steel, stainless steel, Hastelloy, other special alloys.
  • Temperature: dependent on metal.
  • Pressure: per ANSI rated class.
  • Sizes: 2 to 8 inches, other sizes available.
Spray Nozzle for Sight Glass

Ideal for Industrial Weld-On Sight Glass Assembly, High or Low Pressure (DIN 28120 style). Requires threaded bore hole in sight glass assembly and weld pad.

  • Material: stainless steel.
  • Temperature: up to 450 degrees F.
  • Pressure: dependent on sight glass.
  • Sizes: fits any size DIN 28120 style sight glass.
Replacement Sight Glass Disc, Borosilicate

Circular sight glass discs for use in sight glass assemblies. Borosilicate formula glass has many advantages.

  • Temperature: 536 degrees F.
  • Sizes: most sizes available.
  • Pressure: dependent on size.
  • Other materials available such as quartz and sapphire.
Internal Light Timer

Electronic timer for sight glass lights. The internal timer is only available on certain model LumiStar Lights for hazardous and non-hazardous locations.

  • EX Models: USL06-EX, USL07-EX and USL07 LF-EX (LumiFlex).
  • Non-EX Models: LumiStar sizes DN175 to 225, USL06 and USL07.
  • Factory-set times: 5 minutes.
  • Power: 12 V, 24 V, 120 V or 230 V.
External Light Timer

Electronic timer for sight glass lights.

  • Housing: polyester resin.
  • Temperature: ambient up to 40 degrees C.
  • Timer settings: 10 seconds to 60 minutes.
  • Power: 24, 120, 230 volt.
  • Standards: explosion-proof ATEX Zones 1 & 2 and 21 & 22.
  • Size: 80 x 72 x 185mm.

L.J. Star, the leader in process observation equipment and technology, offers a complete line of sight glass accessories that corresponds with its complete line of sight glasses, lights, sanitary fittings and level gage instrumentation.

Metaglas® Sight Glass Discs are resistant to impact, pressure, thermal and mechanical stresses. Metaglas prestressed glass provides reliability against total failure, simplified installation, and extremely long and continuous service. And Metaglas can be reused in the same or other applications, where conventional borosilicate sight glass discs cannot.

L. J. Star also supplies light port glass discs for Lumiglas® light ports and custom sizes, including Borosilicate Glass to DIN 7080; Soda Lime Glass to DIN 8902; and Quartz Glass.

We also provide wipers for the manual cleaning of the inside glass surface of light ports and sight ports. Sight glass wiper blades are available in Teflon or Silicone and are a great addition to when used in combination with a spray ring or spray nozzle.

Luminaire timers permit direct or indirect switching of an Ex or Non-Ex Light where observation is only occasional and brief. Illumination is limited to the required period, and luminaires are not left switched on unintentionally, reducing power consumption and heat build-up, and increasing halogen lamp life.

The new TCI ClampConnect™ sanitary clamp virtually eliminates the dead space associated with a standard ferrule. This patent-pending clamp design eliminates the need for tools by using a standard sanitary clamp and gasket for assembly. Unlike other designs, there are no acorn nuts or studs that can be lost or cross threaded.